【软管泵】滑模机口碑好实力强

挤压轮和滑靴的结构设计：
对于软管泵的内部结构，通常有挤压轮和滑靴两种设计方法。对于软管挤压，挤压轮的设计更为柔软，因为当软管被压缩时，挤压轮在软管表面滚动。滑靴的设计不仅压缩了软管，而且在软管表面产生滑动摩擦，使挤压后的管道产生很大的磨损。因此，在采用滑靴结构设计时，必须在泵壳内壁添加足够的润滑油，以帮助延长软管的使用寿命。滑靴的设计和在泵中添加润滑剂，在一定程度上增加了滑靴蠕动泵的复杂性和成本。                   

首先我们先介绍一下软管泵，软管泵又称蠕动泵。为了泵体污染流体或流体污染泵体的危险性，整个泵的装置中只有软管与介质接触。在一般场合下，软管泵使用的都是天然橡胶的软管。内层和外层都是完整光滑的天然橡胶，其目的是很强防磨损。适用于腐蚀性不高但磨损性很大的如泥浆以及无机物等等介质。而且一般适用于脂肪、油类或油脂的介质，以及有机化学物质。内层是橡胶，而外层是天然橡胶或者是复合橡胶。

First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.